Witura WT-1010C2 Uživatelský manuál stáhnout pdf (Strana 29)

101

USER MANUAL

*ACCT#9999

Return Message

ACCT:9999

Note: Please refer to page 43 for Contact-ID Protocol for WT-1010C2

5.6 Setting the Burst On and Burst Off time of DTMF tones

The Burst ON and Burst OFF timing of the sending Contact-ID can be adjust by sending

the following SMS command to the unit.

Text Command:

*BURS#XY

X stands for Burst On time value: 1 – 5

Y stands for Burst Off time value: 1 – 5

Value 1: 10~20ms

Value 2: 20~40ms

Value 3: 50~60ms

Value 4: 60~80ms

Value 5: 80~100ms

Example:

To set the Burst on time to 50~60ms and Burst Off time to 10~20ms, you would send

the following command to the unit.

*BURS#31

5.7 “PSTN Failure” Settings

5.7.1 Enable/Disable the function of Dialing the programmable

Administrator

Central Station number when PSTN Failed

To program the unit to dial the programmed administrator/central station number

when PSTN failed, you can send the following SMS command to the unit.

Text Command:

*PSC?#X

X stands for ON (1) or OFF (0) value

WT1010C2 – USER MANUAL – Rev.2.7 – Technical Support : [email protected]

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

Žádné komentáře

Witura WT-1010C2 Uživatelský manuál Strana 29