Witura WT-1011RC IP 65 Uživatelský manuál stáhnout pdf (Strana 19)

19

WT-1011RC IP65 GSM Remote Controller

And Alarm S

y

stem

WT-1011RC IP65 – USER MANUAL – Rev.1.6 – Technical Support: [email protected]

COPYRIGHT ©2010

WITURA CORPORATION SDN BHD

Function 3:

 Function as pulse counter

 Activates the output relay 2 to stay ON

 Sends a programmable input alert message (*STR2#) once input triggered

 Audible alarm will sound if the alarms function is turned on (*ALM2#1)

Function 4:

 Function as pulse counter

 Activates the output relay 2 for 2 seconds

 Sends a programmable input alert message (*STR2#) once input triggered

 Audible alarm will sound if the alarms function is turned on (*ALM2#1)

Function 5:

 Function as pulse counter

 Activates the output relay 2 with function *PWT2# and *PWK2#

 Sends a programmable input alert message (*STR2#) once input triggered

 Audible alarm will sound if the alarms function is turned on (*ALM2#1)

* For more details on functions of *PWT[N]# and *PWK[N]# please refer to Miscellaneous

Settings on page

Function 6:

 Function as pulse counter

 Activates the output relay 2 with function *PWT2# and *PWK2#

 Audible alarm will sound if the alarms function is turned on (*ALM2#1)

Function 7:

 Function as pulse counter

 Sends a programmable input alert message (*STR2#) once input triggered

 Audible alarm will sound if the alarms function is turned on (*ALM2#1)

Function 8:

 Function as pulse counter

 Sends a programmable input alert message (*STR2#) once input triggered

 Sends a programmable input alert message (*STO2#) once input returned to

normal

 Audible alarm will sound if the alarms function is turned on (*ALM2#1)

Example:

Assume that you want to use input 1 for pulse counter only; you would send the

following SMS message to the unit.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 28 29

Komentáře k této Příručce

Žádné komentáře