Witura WT-9001 IP65 Uživatelský manuál stáhnout pdf (Strana 27)

WT-9001 IP65 GSM Remote Control And Alarm System

WT-9001 IP65 – USER MANUAL – Rev. 3.4 – Technical Support: technical@witura.com

The unit is reset successfully.

The system has the function to activate the relay for a specific time and then be

deactivated for a specific time in a repeating process. To set the opening & closing time

of the relays, you can send the following SMS command to the unit. Note: This function

only applied in input function 5 and 6.

Text Command for Opening time:

*PWT[N]#XXXXX

N stands for Output number 1 – 8

XXXXX stands for 5 digits value: The number of seconds

Text Command for Closing time:

*PWK[N]#XXXXX

N stands for Output number 1 – 8

XXXXX stands for 5 digits value: The number of seconds

Example:

Opening time of output 1 is set as 1 minute (*PWT1#00060) and the Closing time as 5

seconds (*PWK1#00005) and function 5 is applied on Input 1. When input 1 triggered,

output relay 1 will be activated for 1 minute and close for 5 seconds and then back on

for 1 minute and close again for 5 seconds and will keep on repeating the process until

the command *RLY1#00000 or *RLNU#00000000 is issued.

REST-D

Wait…

REST-D

5.6.14 Setting the Function of Opening & Closing time for Output Relay

5.6.15 Auto Restart System

1 2 ... 22 23 24 25 26 27 28 29 30 31

Žádné komentáře

Witura WT-9001 IP65 Uživatelský manuál Strana 27