Witura WT-9001 IP65 Uživatelský manuál Strana 11

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 36
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 10
11
WT-9001 IP65 GSM Remote Monitorin
g
& Remote Control S
y
stem
WT-9001 IP65 – USER MANUAL – Rev. 4.7 – Technical Support: [email protected]
COPYRIGHT ©2011
WITURA CORPORATION SDN BHD
4. Slide the SIM door to lock the SIM card in place
You should install the WT-9001 in a place where there is GSM signal coming from the
operator you want to use. Check it with a phone before proceeding with the installation.
If you need to install the device in a place with little signal, you may consider using an
external antenna that we may supply as an option to be purchased separately with 5m
cable.
You can program the WT-9001 via SMS commands using your phone. Any programming
command sent by SMS can be in SMALL or CAPITAL letters. The fields between square
brackets are parameters; do NOT enter the square brackets. When you send a command,
you will receive the answer for the first time even if your GSM number is not in the
administrator list. This happens because the WT-9001 recognizes any GSM number as
administrator and answers to it.
Attention: Please program the WT-9001 unit systematically begin with programming the
administrator number.
The 20 administrator numbers can be programmed with a text command via SMS.
Text Command:
*TEL[N]#XXXXXXXXXX
N stands for administrator number 1 – 20
XXXXXXXXXX stands for the phone number you want to program as administrator.
Please note that it is possible to program up to a maximum of 16 digits for a phone
number.
Example:
To program phone number 1111222233 as administrator into list number 1, you would
send the following SMS command to the unit.
*TEL1#1111222233
Example of Returned Message:
TEL1=1111222233
5. WT-9001 IP65 PROGRAMMING INSTRUCTIONS (via SMS Only)
5.1 Programming the Administrator Number
Zobrazit stránku 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Komentáře k této Příručce

Žádné komentáře