Witura WT-9001 IP65 Uživatelský manuál stáhnout pdf (Strana 28)

WT-9001 IP65 GSM Remote Monitorin

& Remote Control S

stem

WT-9001 IP65 – USER MANUAL – Rev. 4.7 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

Text Command:

*USID#XXXX

XXXX stands for 4 digits numeric numbers

Example:

To program User ID 1111 into the WT-9001 device, you would send the following SMS

command to the unit.

*USID#1111

Note: To setup a User ID for the monitoring software, please refer to the WT-9001

Server Software Guide.

To check the programmed User ID, you can send *USID?#

For GPRS internet connection, you will have to configure the APN Settings needed by

your network operator. Different mobile operators have different APN settings. To

configure the APN, you would send the following SMS command.

Text Command:

*ANET#XXXXX…,Username,Password

XXXXX… stands for Access Point Name. Maximum 15 characters

Username maximum 10 characters

Password maximum 15 characters

Example:

To configure the access point Vodanet, user name: 123 and password: 123 you can

send the following text message to the unit.

*ANET#Vodanet,123,123

Note: If there is no user name and password required for GPRS connection, you can

simply send the command as the following

*ANET#Vodanet

To check the APN settings, you can send *ANET?#

5.6.2 APN Settings

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Žádné komentáře

Witura WT-9001 IP65 Uživatelský manuál Strana 28