Witura WT-9001 IP65 Uživatelský manuál stáhnout pdf (Strana 24)

WT-9001 IP65 GSM Remote Monitorin

& Remote Control S

stem

WT-9001 IP65 – USER MANUAL – Rev. 4.7 – Technical Support: [email protected]

WITURA CORPORATION SDN BHD

The system has the function to activate the relay for a specific time and then be

deactivated for a specific time in a repeating process. To set the opening & closing time

of the relays, you can send the following SMS command to the unit. Note: This function

only applied in input function 5 and 6.

Text Command for Opening time:

*PWT[N]#X

N stands for Output number 1 – 8

X stands for the number of seconds for relay to stay on. Range from 0 - 9999999

To query relay on time, you can send SMS command *PWT?#[N]

Text Command for Closing time:

*PWK[N]#X

N stands for Output number 1 – 8

X stands for the number of seconds for relay to stay off. Range from 0 - 9999999

To query relay off time, you can send SMS command *PWK?#[N]

Example:

Opening time of output 1 is set as 1 minute (*PWT1#60) and the Closing time as 5

seconds (*PWK1#5) and function 5 is applied on Input 1. When input 1 is triggered,

output relay 1 will be activated for 1 minute and close for 5 seconds and then back on

for 1 minute and close again for 5 seconds.

The system has the function to sound the connected audible siren when input triggered.

This output is available on the connection PIN50 and ground on the PIN49. To turn

On/Off this function, you can send the following SMS command to the unit.

Text Command:

*ALM[N]#X

5.5 ALARM SETTINGS

5.5.1 Turning the Audible Siren Functions On/Off When Inputs Triggered

5.4.13 Setting the Function of Opening & Closing time for Output Relay

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Žádné komentáře

Witura WT-9001 IP65 Uživatelský manuál Strana 24